SKIMS BODY, INC. disclaims all warranties, express or implied, except as required by law. Our liability is limited to replacement of the product. SKIMS BODY, INC. is not liable for incidental or consequential damages resulting from use inconsistent with these instructions.

Perform a skin test before extended use by wearing the product for up to 4 hours. Wait 24 hours and check for irritation before wearing longer. Do not use on broken skin, rashes, sunburn, or areas with existing depigmentation. Do not wear overnight or for more than 4–6 hours at a time. Not recommended for individuals with sensitive skin or those who are breastfeeding. Sensitivity may occur even without prior reaction to similar products.

Perform a skin test before extended use by wearing the product for up to 4 hours. Wait 24 hours and check for irritation before wearing longer. Do not use on broken skin, rashes, sunburn, or areas with existing depigmentation. Do not wear overnight or for more than 4-6 hours at a time. Not recommended for individuals with sensitive skin or those who are breastfeeding. Sensitivity may occur even without prior reaction to similar products.

Wash and thoroughly dry your skin before use. Do not apply lotion, powder, or oils to the skin prior to application. If your soap contains oils or moisturizers, switch to a different cleanser before applying.

Gently lift a corner and slowly roll it off your skin. Do not pull up and away. Keep your fingers in contact with your skin as you roll.

For the most comfortable removal, wear the Silicone Lift Bra for at least 4 hours before removing. Removing earlier may cause discomfort as the adhesive needs time to fully bond.

If residue remains on your skin, apply baby oil, olive oil, or a similar oil and let it sit for a few minutes. The residue should wipe away easily.

To get the best results, you need to create a skin fold. Hold the upper half of the Silicone Lift Bra with your fingertips about 2 inches away from your skin. Slowly lift the skin up and away from your body so that the excess skin folds into the center section. Once you have a tight fold, attach the upper portion securely.

This usually happens for one of two reasons:

Make sure your skin is freshly washed and completely free of oils, lotions, and powders. When applying, rub each half firmly for a full 60 seconds. The longer you rub to warm the adhesive, the better it will stick.

Use your fingers to lift the skin and experiment with different placements to find what works best for your body. The instructions provide general guidance, but practicing will help you find your ideal placement.

No. To remove comfortably, gently lift a corner and roll the Silicone Lift Bra backward off the skin, moving slowly. Keep your fingers in contact with your skin during removal and avoid pulling up and away. If needed, apply a small amount of oil to help release the adhesive.

The Silicone Lift Bra is sweat-proof and suitable for humid conditions or outdoor activities. However, it is not designed for submersion in water. If you will be swimming, it may come off.

When applied according to the instructions, the Silicone Lift Bra will stay in place for up to 4 hours and will not come off until you remove it.

No. Your skin needs time to breathe and return to its natural position. Wearing the product overnight may cause irritation.

Yes. Removal exfoliates the top layer of skin, which may remove self-tanner from that area.

The Silicone Lift Bra is designed to fit most body types, but depending on your frame, it may wrinkle at the top. If you have a smaller frame, try trimming the edges to better fit your shape.

Dispose of the product in regular household trash. It is not recyclable.